You are here: Home » Products » EV Charging Station » Portable EV Charging Station » EV Charging Station - Portable DC 7KW


Share to:
sharethis sharing button

EV Charging Station - Portable DC 7KW

DC charging piles are suitable for urban special charging piles (buses, taxis, official vehicles, sanitation vehicles, logistics vehicles, etc.), urban public charging stations (private cars, commuting cars, buses), intercity highway charging piles, etc. In the case of DC fast charging, it is particularly suitable for rapid deployment under limited site conditions.
  • KY-DC


d3974252e7374bddee06c5e96aadb6d (1)

7KW DC EV Charger Portable Charging Station


Product Description




Robust Enclosure

Warter proof level IP54.Youcan use the item outdoor anddo not have to worry eve inrainy days.The shell is madeof ABS.light but robust,so itwill not be easily damaged.You can add a lock at thebottom of the station topreven lost.


High Compatibility

Our EV charger is compati-biewith most electric vehicles that comply with SAEJ1772 standard or IEC62196-2 photo 


Temperature Monitor

Intelligent chip inside can monitor the temperature of  the station and can automatically cut off the power when the stations overheated. 


Start pause button

Press the button when charging, it can be used ormally. Charging,waituntil charging is completed Press the button to end charging.

EV Charging Station Case
Product parameter


The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%.

The high-frequency switching power supply module adopts full-bridge phase-shift soft-switching technology, and the execution efficiency is high.

The advanced digital current sharing technology effectively improves the current sharing accuracy and anti-interference; the first module sleep technology and the wheeling technology ensure the high-efficiency operation of the system;

Intelligent charging process control and perfect charging process monitoring and protection, fool-like operation;

One button is automatically filled with simple and practical;

Display the charging voltage, current, SOC and other information and operating status in real time, and display the charging degree after charging is completed;

Module hot swap technology makes maintenance more convenient;

Working environment temperature -20+50 °C.

Scope of application

Portable DC charging piles for private use (private cars, logistics vehicles, trucks, etc.)

The operating company leases with the car.

The yard is delivered with the car;

Particularly suitable for rapid deployment where the site is limited.

The main technical parameters

Product number KY-DC-7KW KY-DC-15KW KY-DC-20KW
Detailed specifications rated power 7KW 15KW 20KW
Charging equipment User Interface Digital tube, LED
Installation method Portable
Way of routing After going in and out
Equipment size 345*175*265 540*375*195 540*375*195
Input voltage AC220V±20% AC380V±20% AC380V±20%
Input frequency 45~65Hz
Charging equipment The output voltage 200V-450V 200V-750V
Single gun output current range 0-15A 0-20A
The output voltage 250V-750V 200V-750V(constant power) 200V-750V
Single gun output current range 0-11A 0-37.5A 0-37.5A
Cable length 5m (gun line 2m)
Measurement accuracy Level 0.5

Current limit protection value ≥110%

Voltage regulation accuracy ≤±0.5%

Steady flow accuracy ≤±1%

Ripple coefficient ≤±0.5%

effectiveness ≥94.5%

Power factor ≥0.99 (50% load or more)

Harmonic content THD ≤5% (50% load or more)

HMI LED indicator

Charging mode Automatic charging

payment method no

Communication Interface no

Executive standard GB\T 20234, GB/T 18487, GB/T 27930, NB\T 33008

security function

Overvoltage protection,

 undervoltage protection, 

overload protection, 

short circuit protection, 

grounding protection, 

over temperature protection, 

low temperature protection, 

leakage protection

Operating temperature -25°C~+50°C

Working humidity 5%~95% non-condensing cream

Working elevation <3000m

Protection level IP20

cooling method Air cooled

Noise control ≤55dB

MTBF 100,000 hours
parameter Min Type Max Unit Remarks
range of working temperature -40 25 85 Intelligent derating of 
shell temperature over 70 °C
Operating humidity range 20 25 95 RH% No condensation

2000 m
Atmospheric pressure 70
106 Kpa
Heat dissipation method Air cooled

Installation environment requirements

Ensure that the input yellow PE line is grounded reliably;

It is forbidden to use in an environment with rain;

Keep away from flammable, explosive and corrosive sources;

Avoid steam and dust;

Keep away from electromagnetic interference sources;

Keep away from the heat source and fully consider the space around the pile to facilitate heat dissipation.


  • How do I ensure the safety of my funds and goods?

    We are one of the representative companies of China Customs Integrity Enterprise. You can verify the credibility of our company in any form. We also welcome you to visit our factory at any time.
  • What is the quality and warranty of the charger?

    All of our charging station components have passed CE certification, you can find the CE mark on our charger.
    We provide a 12-month warranty for the charger, in addition, we also provide lifetime technical support.
  • Does your charger support OCPP function?

    Yes, our charger supports OCPP 1.6 and can be connected to the Internet.Even we have chargers that support Ethernet, 3G, and 4G functions.
  • Are there any successful cases you can refer to?

    We already have many successful examples of projects in China. We have successful cases of photovoltaic power distribution and charging station construction in foreign countries such as Europe, India, Russia and other countries.


  • [Company News] Wenzhou ANFU Electrical Co., Ltd.
    Established in 2002, Wenzhou ANFU Electric Co., Ltd. is a comprehensive enterprise integrating R&D, production, sales and service.The company is located in Liushi Town, the world-famous capital of China's electrical appliances. The company specializes in research anddevelopment of distributed photov



Tel: 86-400-805-5677
Tel: 86-13889667117
Add: No. 237, Weisan Road, Yueqing Economic Development Zone
Yueqing, Wenzhou, Zhejiang, China


Leave a Message
Copyright © 2021 Wenzhou Kangyu Electrical Co., Ltd. All rights reserved.